POLYGAR CHLORINE
PACKAGING | Available in cans of 30 L ~ 40-41 kg (18% solution), in pallet tanks of 1000 L ~ 1360 kg (18% solution) or in a tanker up to 25 tons.
STORAGE | The solution should be stored in a cool place and in corrosion-resistant tanks. PVC, PE, PP, PVDF or polyester plastics.
REGULATIONS | Complies with Regulation (EC) No Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Licensing and Restrictions of Chemical Products (REACH) of the European Union and standard EN 883.
The polyaluminum chloride solution is slightly cloudy and yellowish Available in high-strength solution & gt; 65% and low basicity ~ 45% and. The solutions are available with an Al 2 O 3 content of 9 – 18% by weight. It is recommended that PAC solutions be dosed without diluting at points where there is intense vortexing (force). The use of water to dilute the product can lead to its precipitation (hydrolysis).
This is a very active solution that finds application:
– As a means of flocculation-burden-sedimentation in the treatment of drinking water, swimming pool water and liquid waste (industrial) and / or municipal wastewater.
– In the removal of humic substances and pesticides found in artificial dams and lakes.
– In the removal of carcinogens and heavy metals.
– In the binding and removal of phosphates.
– In the treatment of surface waters for the production of drinking water.
– In the fight against turbidity presented by organic and inorganic impurities that end up in the water after heavy rainfall.
– To improve the texture of the condensed mud that results in the treatment systems of industrial wastewater and urban wastewater, in order to achieve a good degree of dehydration.
– In the breakdown of emulsions.
– In the discoloration of the drains.
ANIONIC MULTILECTROLYTES
PACKAGING | Available in 25 kg bags.
REGULATIONS | Complies with Regulation (EC) No Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Licensing and Restrictions of Chemical Products (REACH) of the European Union.
Aqueous solution of ferrous sulfate chloride is the predominantly inorganic flocculant used for the treatment of industrial water, liquid industrial effluents and urban waste water. It has a dark brown color and is active in a wide range of pH values with minimal trace element content and easy dosing. (Below -10οC there is a large increase in its viscosity).
Strongly active solution suitable as a flocculating – weighting – precipitating agent resulting in:
– The binding and removal of phosphates and arsenic.
– The active fight against the phenomenon of floating mud in sedimentation tanks.
– The “relief” of wastewater and wastewater treatment plants, which while designed and constructed for smaller loads than those actually required by the conditions to accept, so that their operation and efficiency meet quality requirements so that treated water is suitable for disposal to a natural recipient.
The binding and removal of hydrogen sulfide and sulfides.
– The treatment of surface water for industrial water production.
– The treatment of supplementary water of refrigeration circuits of steam production units and electricity.
– The improvement of the texture of the condensed mud that results in the industrial wastewater and urban wastewater treatment systems, in order to achieve a good degree of dehydration.
– The breakdown of emulsions.