CONSTRUCTION
The drum is made of stainless steel AISI 304. The system consists of the stainless steel metal frame, the rotating cylindrical drum (filter), the scraper and the electric drive.
The frame is made of stainless steel and consists of the feed-rest container, the treated container, the solid collection hopper and the legs.
The drum (filter) is formed by horizontal trapezoidal blades on which a spiral blade of trapezoidal cross section is welded, finally forming holes of 0.50 – 2.00 mm.
The scraper is made of stainless steel blade of special soft alloy so that when in contact with the drum it does not damage it.
The movement is given by a three-phase electric gearbox, directly connected to the shaft of the drum, so that the speed can be easily adjusted.
The whole construction is based on stainless steel legs, the height of which is made to order by the customer.
MODE OF OPERATION
The waste enters the resting vessel (rear of the drum) and overflows on the filter from the outside inwards. In this way only the liquid passes through the filter while any solids are retained and removed from the scraper.
At the same time there is a built-in cleaning system that keeps the filter holes clean through water spray.
Finally, the solid waste collected from the scraper through a funnel falls into a collection bin.
| INDICATIVE BENEFITS – FILTER SPACE | ||||||
| SPACED mm | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 |
| TYPE \ SUPPLY | m 3 / h | m 3 / h | m 3 / h | m 3 / h | m 3 / h | m 3 / h |
| ΤΧ 0606 | 100 | 140 | 175 | 195 | 220 | 235 |
| ΤΧ 0609 | 150 | 215 | 260 | 290 | 335 | 360 |
| ΤΧ 0612 | 200 | 280 | 345 | 390 | 435 | 470 |